Technical Datasheets SigmaTherm 230 Technical Data Sheet SigmaTherm 230 Base Material Safety Data Sheet SigmaTherm 230 Hardener Material Safety Data Sheet
SigmaTherm 230 two component high build heat resistant phenolic epoxy coating
SigmaTherm 230. Two component high build heat resistant phenolic epoxy coating.
Suitable as heat resistant system under insulation up to 230°C.
Good anticorrosive properties.
Good application properties, resulting in a smooth layer.
No post curing is required to obtain mechanical strength.
Theoretical spreading rate 4.5 m²/l for 150 μm. Touch dry after 2 - 3 hours at 20°C, 14 - 16 hours at 5°C.
Overcoating interval min. 8 hours, max. 14 days. Eggshell finish.
Full cure after see curing table.
Available in 4 Litres.
These colours are for reference only and are an approximation of the true colours. The quality, type and settings of the output device used to display this page will also affect the visible colour.
